worldwide shipping
delivery by DHL, GLS & UPS
14 days money back guarantee
SSL secured payments

WE/LOVE/VORON

Fermio Labs provides the Voron Design community with high quality products. The founders are deeply rooted in and connected with the community and want to make Voron 3D printers more accessible.

RECENTLY ADDED

Tip
New
V01
VORON0 V0.1 Kirigami, blue
VORON0 V0.1 Kirigami, blue
Anodizing / Color: blue
Kirigami replaces the entire build plate support assembly for a VORON0 V0.1 with a much more rigid and stiffer solution. The clever design obsoletes the weak assembly of extrusions and printed parts. It is bolted directly on to the linear guideways blocks and attached by an additional printed part to the Z axis lead screw. Additionally it can house up to six WAGO 211 to quick connect build plate wiring. All critical bends and surfaces are perfectly perpendicular and parallel to each other. Contents 1 pcs. laser-cut, bend, sand-blasted and anodized Kirigami 8 pcs. M2 x 4mm button head screw (DIN912, 12.9) 6 pcs. WAGO 221-412 terminals Note Original design by Christopher Müller. Based on V3. Source: https://github.com/christophmuellerorg/voron_0_kirigami_bed

€24.99*
Tip
New
V01
VORON0 V0.1 Kirigami, space gray
VORON0 V0.1 Kirigami, space gray
Anodizing / Color: space gray
Kirigami replaces the entire build plate support assembly for a VORON0 V0.1 with a much more rigid and stiffer solution. The clever design obsoletes the weak assembly of extrusions and printed parts. It is bolted directly on to the linear guideways blocks and attached by an additional printed part to the Z axis lead screw. Additionally it can house up to six WAGO 211 to quick connect build plate wiring. All critical bends and surfaces are perfectly perpendicular and parallel to each other. Contents 1 pcs. laser-cut, bend, sand-blasted and anodized Kirigami 8 pcs. M2 x 4mm button head screw (DIN912, 12.9) 6 pcs. WAGO 221-412 terminals Note Original design by Christopher Müller. Based on V3. Source: https://github.com/christophmuellerorg/voron_0_kirigami_bed

€24.99*
Tip
New
V01
VORON0 V0.1 Kirigami, red
VORON0 V0.1 Kirigami, red
Anodizing / Color: red
Kirigami replaces the entire build plate support assembly for a VORON0 V0.1 with a much more rigid and stiffer solution. The clever design obsoletes the weak assembly of extrusions and printed parts. It is bolted directly on to the linear guideways blocks and attached by an additional printed part to the Z axis lead screw. Additionally it can house up to six WAGO 211 to quick connect build plate wiring. All critical bends and surfaces are perfectly perpendicular and parallel to each other. Contents 1 pcs. laser-cut, bend, sand-blasted and anodized Kirigami 8 pcs. M2 x 4mm button head screw (DIN912, 12.9) 6 pcs. WAGO 221-412 terminals Note Original design by Christopher Müller. Based on V3. Source: https://github.com/christophmuellerorg/voron_0_kirigami_bed

€24.99*
Sold out
Tip
New
Top
V01
VORON0 V0.1 Kirigami, black
VORON0 V0.1 Kirigami, black
Anodizing / Color: black
Kirigami replaces the entire build plate support assembly for a VORON0 V0.1 with a much more rigid and stiffer solution. The clever design obsoletes the weak assembly of extrusions and printed parts. It is bolted directly on to the linear guideways blocks and attached by an additional printed part to the Z axis lead screw. Additionally it can house up to six WAGO 211 to quick connect build plate wiring. All critical bends and surfaces are perfectly perpendicular and parallel to each other. Contents 1 pcs. laser-cut, bend, sand-blasted and anodized Kirigami 8 pcs. M2 x 4mm button head screw (DIN912, 12.9) 6 pcs. WAGO 221-412 terminals Note Original design by Christopher Müller. Based on V3. Source: https://github.com/christophmuellerorg/voron_0_kirigami_bed

€24.99*
New
V24
TRI
Klicky Probe
Klicky Probe
Klicky is a microswitch probe with magnetic attachment. Note You are buying 3D printed parts only. Any additional hardware shown is for demonstration purposes only.

€23.99*
New
ALL
Stealthburner LGX Lite Mount
Stealthburner LGX Lite Mount
Stealthburner Clockwork2 compatible Bondtech LGX Lite mount with igus energy chain mount. Note You are buying 3D printed parts only. Any additional hardware shown is for demonstration purposes only.

€23.99*
New
ALL
Stealthburner E3D Revo Voron Mount
Stealthburner E3D Revo Voron Mount
Front and back of the Stealthburner Clockwork2 E3D Revo Voron toolhead mount. Note You are buying 3D printed parts only. Any additional hardware shown is for demonstration purposes only.

€23.99*
> 500 available
New
Top
ALL
Round Neodym Magnets, 6 x 3 mm, N35H (high temp), electrically conductive
Round Neodym Magnets, 6 x 3 mm, N35H (high temp), electrically conductive
Magnet: N35H, silver, uncoated, electrically conductive
Round neodym magnet, 6 x 3 mm, N35H (≤ 100 °C), nickel plated. Note Electrically conductive.

Content: 10 piece (€0.40* / 1 piece)

Variants from €2.99*
€3.99*
New
Rainbow on a Matchstick (RGB)
Rainbow on a Matchstick (RGB)
Daylight / LED: RGB | Daylight / Size: Matchstick
COB chainable 24V LED baron both sides a JST-XH 2 pin connectorCRI >= 90 CTT = 4000KRGB chainable 5V RGB LED baron both sides a JST-XH 3 pin connector WS2812B LEDsone resistor for the dataline is inside each box, in case you need it to get right color control Length Stick:            270mmMatchstick:  158mm Note Based on BLAMM's Daylight Voron Hardware design.

Content: 2 piece (€12.50* / 1 piece)

Variants from €17.49*
€24.99*
New
Daylight on a Stick (COB)
Daylight on a Stick (COB)
Daylight / LED: COB | Daylight / Size: Stick
COB chainable 24V LED baron both sides a JST-XH 2 pin connectorCRI >= 90 CTT = 4000KRGB chainable 5V RGB LED baron both sides a JST-XH 3 pin connector WS2812B LEDsone resistor for the dataline is inside each box, in case you need it to get right color control Length Stick:            270mmMatchstick:  158mm Note Based on BLAMM's Daylight Voron Hardware design.

Content: 2 piece (€10.00* / 1 piece)

Variants from €17.49*
€19.99*

STEALTHBURNER

%
Top
Bondtech Drive Gear Set, 1.75 mm Filament, 5 mm Shaft
Bondtech Drive Gear Set, 1.75 mm Filament, 5 mm Shaft
Bondtech / Drive Gear: 1.75 mm / 5 mm
Bondtech drive gear kit in hardened and surface protected steel. Precision cnc-machined. Super sharp teeths for maximum grip on the filament. The perfect choice for a high-performance feeding system. Extremely high wear resistance for use with abrasive filaments. These drivegear kits come as a set consisting of a primary drive gear, a secondary drive gear, bearings and a shaft. Gear set for filament size 1.75 mm, primary gear with inner diameter 5 mm, secondary gear with two needle bearings, M3x2 setscrew and one 3x20 mm shaft. Gear set for filament size 1.75 mm, primary gear with inner diameter 8 mm, secondary gear with integrated needle bearings, M4x3 setscrew and one 4x22 mm shaft. Gear set for filament size 2.85 – 3.0 mm, primary gear with inner diameter 8 mm, secondary gear with integrated needle bearings, M4x3 setscrew and one 4x22 mm shaft. A Lithium based grease is recommended to use on the gear section and inside the needle bearings for low friction and to avoid wear. A small dab of grease is enough.

€27.99* €29.99* (6.67% saved)
previously €29.99*
Top
ALL
StealthBurner RGB LED Wire Harness, 350 Spec
StealthBurner RGB LED Wire Harness, 350 Spec
Voron / Spec: 350
Wire harness addition for our StealthBurner RGB LED Kit using black Helukabel Heluflon®-fep-6y 0.25mm². One end with a Molex MicroFix 3.0 connector, the other end with a Dupont connector fitting for BTT Octopus and Fysetc Spider.

Variants from €10.49*
€12.49*
New
ALL
Stealthburner E3D Revo Voron Mount
Stealthburner E3D Revo Voron Mount
Front and back of the Stealthburner Clockwork2 E3D Revo Voron toolhead mount. Note You are buying 3D printed parts only. Any additional hardware shown is for demonstration purposes only.

€23.99*
Top
MR85 2RS / MR 085 2RT, 5 x 8 x 2.5 mm, Miniature Deep Groove Ball Bearing
MR85 2RS / MR 085 2RT, 5 x 8 x 2.5 mm, Miniature Deep Groove Ball Bearing
Bearings: MR85-2RS
Miniature ball bearings are deep groove ball bearings in small. Their dimensions make them suitable for special applications. In addition, they allow very high speeds with low noise.

Variants from €0.99*
€1.49*
Sold out
Top
Bondtech Shaft Assembly
Bondtech Shaft Assembly
Replacement Shaft assembly for our Bondtech Mini Geared (BMG), SingleDirect and DualDirect extruders. It includes the set screw for primary 1.75/5.0 drive gear.

€4.99*
New
ALL
Stealthburner LGX Lite Mount
Stealthburner LGX Lite Mount
Stealthburner Clockwork2 compatible Bondtech LGX Lite mount with igus energy chain mount. Note You are buying 3D printed parts only. Any additional hardware shown is for demonstration purposes only.

€23.99*
Top
ALL
StealthBurner RGB LED Wire Harness, 300 Spec
StealthBurner RGB LED Wire Harness, 300 Spec
Voron / Spec: 300
Wire harness addition for our StealthBurner RGB LED Kit using black Helukabel Heluflon®-fep-6y 0.25mm². One end with a Molex MicroFix 3.0 connector, the other end with a Dupont connector fitting for BTT Octopus and Fysetc Spider.

Variants from €10.49*
€11.49*
Top
Bondtech Thumbscrew Assembly
Bondtech Thumbscrew Assembly
Thumbscrew replacement for Bondtech extruder.

€1.99*
Top
ALL
Brass Heat Insert, 5 x 4 mm, M3
Brass Heat Insert, 5 x 4 mm, M3
Brass heat inserts, specially developed for FDM 3D printed parts and post-insertion.

Content: 100 piece (€0.09* / 1 piece)

€8.99*
ALL
StealthBurner RGB LED Wire Harness, 250 Spec
StealthBurner RGB LED Wire Harness, 250 Spec
Voron / Spec: 250
Wire harness addition for our StealthBurner RGB LED Kit using black Helukabel Heluflon®-fep-6y 0.25mm². One end with a Molex MicroFix 3.0 connector, the other end with a Dupont connector fitting for BTT Octopus and Fysetc Spider.

€10.49*

AVAILABLE SOON

Sold out
New
IWISS HS-D2 Cable Stripper
IWISS HS-D2 Cable Stripper
The HS-2D multi-function stripping tools are specially designed and precisely machined teeth grabs, holds, pulls and removes outer jacket in a simple one-handed motion. Also a wire crimping tool(crimper) which crimps insulated and non-insulated automotive ignition terminals and includes a wire cutter saving you time and money purchasing individual tools. MINIMAL EFFORT: The ratcheting action requires a fraction of hand strength. This is a must-have for professional & DIY electricians’ tool sets. SELF-ADJUSTING: The automatic mechanism strips wires from 10-24 AWG (0.5mm-6.0mm²). MULTI USE: This multi-purpose plier crimps 10-22 AWG insulated & non-insulated terminals and 7-8mm ignition terminals with an adjustable stopper. VERSATILE AND USEFUL: This handy tool should be part of any tool kit with its ability to crimp and strip copper and aluminum of a wide variety of sizes. RELIABLE & EFFICIENT: This high quality Gee Gadgets wire stripper is built tough to be durable and very long lasting. Specifications Easy stripping without any adjustment. Multifunction, made of steel by special hardened, with long lifetime. For Stripping wire from AWG24-10 (0.2 -6.0mm²). Cutting wire from AWG24-10 (0.2 -6.0mm²). Crimping insulated terminal from AWG22-10 (0.6 -6.0mm²).

€14.99*
Sold out
New
IWISS 2820M Crimping Tool
IWISS 2820M Crimping Tool
The IWS-2820 Micro crimping pliers are our latest new design pliers, which works on AWG 28-20 open barrel terminals and connectors. Double-hinge mechanism and ultra-precise jaw provide reliable and accurate connections every time. This micro crimping tools works on typical JAM, Molex, JST and Tyco terminals and other U-barrel terminals and connectors. Specification: Model: IWS-2820M Capacity: 0.08-0.5mm2 AWG : 28-20AWG Length : 180mm Weight : 0.2Kg Application : open barrel connector

€24.99*
Sold out
New
VSW
MEAN WELL LRS-350-24, 350 W, 24 V, 14 A Power Supply
MEAN WELL LRS-350-24, 350 W, 24 V, 14 A Power Supply
Mean Well / Power Supply: LRS-350-24

Variants from €14.99*
€39.99*
Sold out
New
ALL
MEAN WELL UHP-200-24, 200 W, 24 V, 8 A Power Supply
MEAN WELL UHP-200-24, 200 W, 24 V, 8 A Power Supply
Mean Well / Power Supply: UHP-200-24

Variants from €14.99*
€69.99*
Sold out
New
ALL
MEAN WELL LRS-200-24, 200 W, 24 V, 8 A Power Supply
MEAN WELL LRS-200-24, 200 W, 24 V, 8 A Power Supply
Mean Well / Power Supply: LRS-200-24

Variants from €14.99*
€29.99*
Sold out
New
V01
MEAN WELL LRS-150-24, 150 W, 24 V, 6 A Power Supply
MEAN WELL LRS-150-24, 150 W, 24 V, 6 A Power Supply
Mean Well / Power Supply: LRS-150-24

Variants from €14.99*
€19.99*

ON SALE

EOL
Only 7 available
Aluminium Plate, 120 x 120 x 6 mm
Aluminium Plate, 120 x 120 x 6 mm
Dimension / Thickness: 6 mm | Dimensions: 120 x 120 mm
Saw cut, precision milled and stress relieved cast aluminium plates. These are meant for DIY enthusiasts who want to create their own build plates. Made from the same raw material we use for our famous build plates!

€9.99*
EOL
Aluminium Plate, 150 x 150 x 6 mm
Aluminium Plate, 150 x 150 x 6 mm
Dimension / Thickness: 6 mm | Dimensions: 150 x 150 mm
Saw cut, precision milled and stress relieved cast aluminium plates. These are meant for DIY enthusiasts who want to create their own build plates. Made from the same raw material we use for our famous build plates!

Variants from €9.99*
€12.99*
EOL
Only 3 available
%
VSW
Misumi VORON Switchwire Frame, black
Misumi VORON Switchwire Frame, black
Anodizing / Color: black | Voron / Model: Switchwire | Voron / Spec: 250
Misumi VORON frame kits contain all needed aluminium extrusions, machined to spec (holes and tapped ends). Note: our VORON2 V2.4 frames do not include nor need 4 pcs of 90° angled corner cubes.

€99.99* €129.99* (23.08% saved)
EOL
MR148 2RS / MR 148 2RS, 8 x 14 x 4 mm, Miniature Deep Groove Ball Bearing
MR148 2RS / MR 148 2RS, 8 x 14 x 4 mm, Miniature Deep Groove Ball Bearing
Bearings: MR148-2RS
Miniature ball bearings are deep groove ball bearings in small. Their dimensions make them suitable for special applications. In addition, they allow very high speeds with low noise.

Variants from €0.99*
From €2.49*
EOL
%
F 688 ZZ / F688 ZZ, 8 x 16 x 5 mm, Miniature Flanged Ball Bearing
F 688 ZZ / F688 ZZ, 8 x 16 x 5 mm, Miniature Flanged Ball Bearing
Bearings: F688-ZZ
Miniature ball bearings are deep groove ball bearings in small. Their dimensions make them suitable for special applications. In addition, they allow very high speeds with low noise.

Variants from €0.99*
€2.49* €4.99* (50.1% saved)
previously €4.99*
EOL
Only 8 available
%
Top
V01
LDO 35STH26-0404AH
LDO 35STH26-0404AH
Suitable for Pocketwatch 1 extruder.

€9.99* €14.99* (33.36% saved)
previously €14.99*

Mainsail Trident Sponsoring

We're proud to sponsor the Mainsail Trident project with our finest selection of awesome products! Stay tuned for further updates ...